{"product_id":"fiat-ducato-3-facelift-hood-strut-kit-2014","title":"Fiat Ducato 3.ª geração facelift (250) Kit de amortecedores do capô 2014+","description":"\u003ch2\u003eComplete Hood Strut Kit for Fiat Ducato 3rd Gen Facelift (250) 2014+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Fiat Ducato 3rd Gen Facelift (body \/ chassis code 250) produced 2014+, and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fiat\u003c\/li\u003e\n\u003cli\u003eModel: Ducato\u003c\/li\u003e\n\u003cli\u003eGeneration: 3rd Gen Facelift\u003c\/li\u003e\n\u003cli\u003eBody \/ Chassis Code: 250\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2014+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-BOX-02-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIs This the Right Kit for Your Ducato?\u003c\/h2\u003e\u003cp\u003eThis kit is listed for the Fiat Ducato 3rd Gen Facelift (body \/ chassis code 250) built in 2014+. It is intended for the facelifted (restyled) version of this generation; check that your vehicle is the facelift model before ordering. Other generations and body codes of the Ducato use different mounting points and need their own kit.\u003c\/p\u003e\u003ch2\u003eThe Same Kit Also Fits\u003c\/h2\u003e\u003cp\u003eThis hood strut kit (vendor article EU-PE-BOX-02-1) is also listed for the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pt\/products\/citroen-jumper-2-facelift-hood-strut-kit-2014\"\u003eCitroen Jumper 2nd Gen Facelift (250) Hood Strut Kit 2014+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pt\/products\/peugeot-boxer-2-hood-strut-kit-2014\"\u003ePeugeot Boxer 2nd Gen Facelift (250) Hood Strut Kit 2014+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Fiat Ducato.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Fiat Ducato.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body code match your vehicle, and review any fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Decoin","offers":[{"title":"Default Title","offer_id":67599218049192,"sku":"DCN-67599218049192","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/1_370e8d1a-1e48-43d9-8561-e28e93d1d510.jpg?v=1786272403","url":"https:\/\/decoinfabric.com\/pt\/products\/fiat-ducato-3-facelift-hood-strut-kit-2014","provider":"decoinfabric","version":"1.0","type":"link"}