{"title":"Peugeot Hood Strut Kits \u0026 Gas Hood Lift Supports","description":null,"products":[{"product_id":"peugeot-partner-1-hood-strut-kit-2002-2008","title":"Peugeot Partner 1 Hood Strut Kit 2002-2008","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot Partner 1 2002-2008\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot Partner 1 (2002-2008) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: Partner 1\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2002-2008\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-PAR-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot Partner 1.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot Partner 1.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011430568,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_46bf35a5-9565-482b-beb9-492c6d6066d9.png?v=1786220240"},{"product_id":"peugeot-partner-2-hood-strut-kit-2008-2018","title":"Peugeot Partner 2 Hood Strut Kit 2008-2018","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot Partner 2 2008-2018\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot Partner 2 (2008-2018) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: Partner 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2008-2018\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-PAR-02-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot Partner 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot Partner 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011463336,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_69c27c75-9605-4816-be63-597c67db0d71.png?v=1786220242"},{"product_id":"peugeot-partner-3-hood-strut-kit-2018","title":"Peugeot Partner 3 Hood Strut Kit 2018+","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot Partner 3 2018+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot Partner 3 (2018+) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: Partner 3\u003c\/li\u003e\n\u003cli\u003eGeneration: 03\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2018+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-PAR-03-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot Partner 3.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot Partner 3.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011496104,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_55b97cd9-8aff-4986-8cd7-4243bba7f37b.png?v=1786220242"},{"product_id":"peugeot-2008-2-hood-strut-kit-2019","title":"Peugeot 2008 2 Hood Strut Kit 2019+","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 2008 2 2019+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 2008 2 (2019+) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 2008 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2019+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-2008-02-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 2008 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 2008 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011528872,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_4299cb89-7c8a-47b9-82d8-6397c6cf0873.png?v=1786220243"},{"product_id":"peugeot-206-hood-strut-kit-1998-2008","title":"Peugeot 206 Hood Strut Kit 1998-2008","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 206 1998-2008\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 206 (1998-2008) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 206\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 1998-2008\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-206-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 206.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 206.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011561640,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_9a276c06-e516-4f89-a152-2ef09d4ee75c.png?v=1786220244"},{"product_id":"peugeot-207-hood-strut-kit-2006-2013","title":"Peugeot 207 Hood Strut Kit 2006-2013","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 207 2006-2013\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 207 (2006-2013) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 207\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2006-2013\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-207-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 207.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 207.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011627176,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_e5eaf54c-9f0a-451e-9bac-72f3abda95be.png?v=1786220245"},{"product_id":"peugeot-307-hood-strut-kit-2001-2004","title":"Peugeot 307 Hood Strut Kit 2001-2004","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 307 2001-2004\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 307 (2001-2004) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 307\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2001-2004\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-307-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 307.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 307.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011692712,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_1663bbfb-51e4-4fe7-be63-038689335d50.png?v=1786220246"},{"product_id":"peugeot-308-2-hood-strut-kit-2013-2021","title":"Peugeot 308 2 1-Strut Hood Strut Kit 2013-2021","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 308 2 2013-2021\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 308 2 (2013-2021) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 308 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2013-2021\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-308-02-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 308 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 308 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011725480,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_4f3f9a12-c053-456b-b805-aadc488dcf8b.png?v=1786220247"},{"product_id":"peugeot-308-2-hood-strut-kit-2013-2022","title":"Peugeot 308 2 2-Strut Hood Strut Kit 2013-2021","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 308 2 2013-2021\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 308 2 (2013-2021) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 308 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2013-2021\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-308-02-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 308 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 308 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011758248,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_27ac747f-1d18-4790-88fe-695204475277.png?v=1786220248"},{"product_id":"peugeot-407-hood-strut-kit-2004-2011","title":"Peugeot 407 Hood Strut Kit 2004-2011","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 407 2004-2011\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 407 (2004-2011) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 407\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2004-2011\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-407-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 407.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 407.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011791016,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_a8f1e1f3-2397-423c-94ce-fdb47dfa0c0e.png?v=1786220249"},{"product_id":"peugeot-4007-hood-strut-kit-2007-2012","title":"Peugeot 4007 Hood Strut Kit 2007-2012","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 4007 2007-2012\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 4007 (2007-2012) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 4007\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2007-2012\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-4007-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 4007.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 4007.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011823784,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_554abd2f-bcc6-4fd5-a92f-ab83c02b6a5e.png?v=1786220250"},{"product_id":"peugeot-408-3-hood-strut-kit-2023","title":"Peugeot 408 3 Hood Strut Kit 2023+","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 408 3 2023+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 408 3 (2023+) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 408 3\u003c\/li\u003e\n\u003cli\u003eGeneration: 03\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2023+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-408-03-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 408 3.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 408 3.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011856552,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_181fc9e1-7180-48b3-af8f-a33a14a78514.png?v=1786220250"},{"product_id":"peugeot-807-hood-strut-kit-2002-2014","title":"Peugeot 807 Hood Strut Kit 2002-2014","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 807 2002-2014\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 807 (2002-2014) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 807\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2002-2014\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-807-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 807.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 807.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011889320,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_427ec23a-3efb-4ba2-944f-03093e7e8d31.png?v=1786220251"},{"product_id":"peugeot-3008-hood-strut-kit-2009-2017","title":"Peugeot 3008 Hood Strut Kit 2009-2017","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 3008 2009-2017\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 3008 (2009-2017) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 3008\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2009-2017\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-5008-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Also listed for: 5008 1 gen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 3008.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 3008.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011922088,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_694026ac-7719-4841-92ea-d79d3779ba23.png?v=1786220252"},{"product_id":"peugeot-3008-hood-strut-kit-2016-2023","title":"Peugeot 3008 Hood Strut Kit 2016-2023","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot 3008 2016-2023\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot 3008 (2016-2023) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: 3008\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2016-2023\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-5008-02-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Also listed for: 5008 2 gen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot 3008.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot 3008.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011954856,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_22d21d31-e795-47f3-a58c-058e8c13d2d8.png?v=1786220253"},{"product_id":"peugeot-boxer-2-hood-strut-kit-2014","title":"Peugeot Boxer 2 Hood Strut Kit 2014+","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot Boxer 2 2014+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot Boxer 2 (2014+) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: Boxer 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2014+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-BOX-02-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot Boxer 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot Boxer 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855011987624,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_644ea9d7-d922-404f-9090-7b7f175fe011.png?v=1786220254"},{"product_id":"peugeot-landtrek-hood-strut-kit-2020","title":"Peugeot Landtrek Hood Strut Kit 2020+","description":"\u003ch2\u003eComplete Hood Strut Kit for Peugeot Landtrek 2020+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Peugeot Landtrek (2020+) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Peugeot\u003c\/li\u003e\n\u003cli\u003eModel: Landtrek\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2020+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-PE-LAN-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Peugeot Landtrek.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Peugeot Landtrek.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":55855012020392,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_a1bee424-8006-43d8-9d7c-f9d3ccfc2e09.png?v=1786220255"}],"url":"https:\/\/decoinfabric.com\/en-hu\/collections\/hood-strut-kits-for-peugeot\/peugeot-407.oembed","provider":"decoinfabric","version":"1.0","type":"link"}