{"title":"Škoda Hood Strut Kits \u0026 Gas Hood Lift Supports","description":null,"products":[{"product_id":"skoda-citigo-hood-strut-kit-2011","title":"Škoda Citigo Hood Strut Kit 2011+","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Citigo 2011+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Citigo (2011+) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Citigo\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2011+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-CIT-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Citigo.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Citigo.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013200040,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_9fc9d167-796d-4c4d-8101-e3765acd7b8d.png?v=1786220284"},{"product_id":"skoda-fabia-mk1-hood-strut-kit-1998-2004","title":"Škoda Fabia Mk1 Hood Strut Kit 1998-2004","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Fabia Mk1 1998-2004\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Fabia Mk1 (1998-2004) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Fabia Mk1\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 1998-2004\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-FAB-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Fabia Mk1.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Fabia Mk1.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013232808,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_39eb3b0f-1f31-4a52-80c8-8531eb5c6a53.png?v=1786220285"},{"product_id":"skoda-fabia-mk2-hood-strut-kit-2009-2017","title":"Škoda Fabia Mk2 Hood Strut Kit 2009-2017","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Fabia Mk2 2009-2017\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Fabia Mk2 (2009-2017) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Fabia Mk2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2009-2017\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-FAB-02-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Fabia Mk2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Fabia Mk2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013265576,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_543549a4-d68f-4600-9530-ed12731df069.png?v=1786220286"},{"product_id":"skoda-karoq-hood-strut-kit-2018","title":"Škoda Karoq Hood Strut Kit 2018+","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Karoq 2018+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Karoq (2018+) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Karoq\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2018+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-KAR-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Karoq.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Karoq.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013298344,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_fd690b08-6976-4c41-8559-2296e48d5495.png?v=1786220287"},{"product_id":"skoda-octavia-tour-hood-strut-kit-1996-2010","title":"Škoda Octavia Tour Hood Strut Kit 1996-2010","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Octavia Tour 1996-2010\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Octavia Tour (1996-2010) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Octavia Tour\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 1996-2010\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-OСT-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Octavia Tour.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Octavia Tour.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013331112,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_4dde1f8c-986e-4d00-86cc-fa9036ab9b4a.png?v=1786220288"},{"product_id":"skoda-octavia-a5-hood-strut-kit-2004-2013","title":"Škoda Octavia A5 Hood Strut Kit 2004-2013","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Octavia A5 2004-2013\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Octavia A5 (2004-2013) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Octavia A5\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2004-2013\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-OСT-02-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Octavia A5.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Octavia A5.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013363880,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_7fb9861e-d3e5-4e6c-b74f-1e818d41bf34.png?v=1786220289"},{"product_id":"skoda-octavia-a7-hood-strut-kit-2013-2019","title":"Škoda Octavia A7 Hood Strut Kit 2013-2019","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Octavia A7 2013-2019\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Octavia A7 (2013-2019) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Octavia A7\u003c\/li\u003e\n\u003cli\u003eGeneration: 03\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2013-2019\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-OСT-03-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Octavia A7.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Octavia A7.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013691560,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_9ef661da-e7a4-43b6-a7e5-032b8ca320cf.png?v=1786220289"},{"product_id":"skoda-rapid-hood-strut-kit-2012","title":"Škoda Rapid Hood Strut Kit 2012+","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Rapid 2012+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Rapid (2012+) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Rapid\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2012+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-RAP-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Rapid.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Rapid.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013724328,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_75263fb3-95f0-48e5-a94b-2d47aa4c2bfa.png?v=1786220290"},{"product_id":"skoda-yeti-hood-strut-kit-2009-2014","title":"Škoda Yeti Hood Strut Kit 2009-2014","description":"\u003ch2\u003eComplete Hood Strut Kit for Škoda Yeti 2009-2014\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Škoda Yeti (2009-2014) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Škoda\u003c\/li\u003e\n\u003cli\u003eModel: Yeti\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2009-2014\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-SK-YET-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Škoda Yeti.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Škoda Yeti.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Škoda","offers":[{"title":"Default Title","offer_id":55855013757096,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_5467f326-ca7b-4474-940b-827b683218d0.png?v=1786220291"}],"url":"https:\/\/decoinfabric.com\/en-fr\/collections\/hood-strut-kits-for-skoda\/skoda-fabia-mk2.oembed","provider":"decoinfabric","version":"1.0","type":"link"}