{"title":"Ford Hood Strut Kits \u0026 Gas Hood Lift Supports","description":null,"products":[{"product_id":"ford-edge-hood-strut-kit-2014-2024","title":"Ford Edge Hood Strut Kit (Aluminum Hood) 2014-2024","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Edge 2014-2024\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Edge (2014-2024) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Edge\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2014-2024\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-EDG-02-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Aluminum hood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Edge.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Edge.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997471400,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_a00ba46b-c468-45d6-9d6d-f2f23a252226.png?v=1786219994"},{"product_id":"ford-edge-hood-strut-kit-2014-2025","title":"Ford Edge Hood Strut Kit (Steel Hood) 2014-2024","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Edge 2014-2024\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Edge (2014-2024) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Edge\u003c\/li\u003e\n\u003cli\u003eGeneration: 02FE\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2014-2024\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-EDG-02FE-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Steel hood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Edge.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Edge.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997504168,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_68ce0f99-5a2a-414d-b44c-2d88b7e135c6.png?v=1786219995"},{"product_id":"ford-explorer-5-hood-strut-kit-2010-2018","title":"Ford Explorer 5 Hood Strut Kit (Aluminum Hood) 2010-2018","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Explorer 5 2010-2018\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Explorer 5 (2010-2018) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Explorer 5\u003c\/li\u003e\n\u003cli\u003eGeneration: 05\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2010-2018\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-EXP-05-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Aluminum hood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Explorer 5.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Explorer 5.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997536936,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_652ba149-41e5-46e2-ab41-434559a4f02b.png?v=1786219996"},{"product_id":"ford-explorer-5-hood-strut-kit-2010-2019","title":"Ford Explorer 5 Hood Strut Kit (Steel Hood) 2010-2018","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Explorer 5 2010-2018\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Explorer 5 (2010-2018) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Explorer 5\u003c\/li\u003e\n\u003cli\u003eGeneration: 05\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2010-2018\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-EXP-05F-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Steel hood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Explorer 5.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Explorer 5.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997569704,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_ebcf4853-5811-442a-b3a0-efda09995ef6.png?v=1786219997"},{"product_id":"ford-explorer-6-hood-strut-kit-2019","title":"Ford Explorer 6 Hood Strut Kit 2019+","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Explorer 6 2019+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Explorer 6 (2019+) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Explorer 6\u003c\/li\u003e\n\u003cli\u003eGeneration: 06\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2019+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-EXP-06-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Aluminum hood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Explorer 6.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Explorer 6.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997602472,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_3f2324e6-3a43-48d7-81bd-c0cd2c96dd35.png?v=1786219998"},{"product_id":"ford-fiesta-5-hood-strut-kit-2001-2009","title":"Ford Fiesta 5 Hood Strut Kit 2001-2009","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Fiesta 5 2001-2009\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Fiesta 5 (2001-2009) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Fiesta 5\u003c\/li\u003e\n\u003cli\u003eGeneration: 05\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2001-2009\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-FIE-05-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Fiesta 5.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Fiesta 5.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997635240,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_9630803e-a997-442f-8983-8fc3d4952f7e.png?v=1786219999"},{"product_id":"ford-focus-2-hood-strut-kit-2004-2008","title":"Ford Focus 2 Hood Strut Kit 2004-2008","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Focus 2 2004-2008\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Focus 2 (2004-2008) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Focus 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2004-2008\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-FOC-02-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Focus 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Focus 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997897384,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_113eb042-4f6d-4958-80f9-061090de11fd.png?v=1786219999"},{"product_id":"ford-focus-2-hood-strut-kit-2008-2011","title":"Ford Focus 2 1-Strut Hood Strut Kit 2008-2011","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Focus 2 2008-2011\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Focus 2 (2008-2011) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Focus 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02r\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2008-2011\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-FOC-02R-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Restyling (facelift)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Focus 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Focus 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997930152,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_943a95b3-e649-4d6b-b9b8-533352981b94.png?v=1786220001"},{"product_id":"ford-focus-2-hood-strut-kit-2008-2012","title":"Ford Focus 2 2-Strut Hood Strut Kit 2008-2011","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Focus 2 2008-2011\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Focus 2 (2008-2011) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Focus 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02r\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2008-2011\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-FOC-02R-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Restyling (facelift)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Focus 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Focus 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997962920,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_a0d0f594-b4a2-4176-a079-90b2b5dfd568.png?v=1786220002"},{"product_id":"ford-focus-3-hood-strut-kit-2010-2018","title":"Ford Focus 3 Hood Strut Kit 2010-2018","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Focus 3 2010-2018\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Focus 3 (2010-2018) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Focus 3\u003c\/li\u003e\n\u003cli\u003eGeneration: 03\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2010-2018\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-FOC-03-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Focus 3.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Focus 3.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854997995688,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_91de0240-6d07-40b1-bbf5-71929b1fdc01.png?v=1786220003"},{"product_id":"ford-fusion-1-hood-strut-kit-2002-2012","title":"Ford Fusion 1 Hood Strut Kit 2002-2012","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Fusion 1 2002-2012\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Fusion 1 (2002-2012) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Fusion 1\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2002-2012\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-FUS-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Fusion 1.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Fusion 1.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998028456,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_b2e65114-6536-4433-a85e-3182af7e16a1.png?v=1786220004"},{"product_id":"ford-fusion-2-hood-strut-kit-2012-2020","title":"Ford Fusion 2 Hood Strut Kit (Steel Hood) 2012-2020","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Fusion 2 2012-2020\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Fusion 2 (2012-2020) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Fusion 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 05\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2012-2020\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-MON-05-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Steel hood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Fusion 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Fusion 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998061224,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_ea88df7a-cbdc-4cba-91d8-544205874359.png?v=1786220006"},{"product_id":"ford-fusion-2-hood-strut-kit-2012-2021","title":"Ford Fusion 2 Hood Strut Kit (Aluminum Hood) 2012-2020","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Fusion 2 2012-2020\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Fusion 2 (2012-2020) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Fusion 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2012-2020\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-FUS-02-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Aluminum hood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Fusion 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Fusion 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998093992,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_bf88799b-5c03-4747-9b7f-d4d4b7dbc621.png?v=1786220007"},{"product_id":"ford-galaxy-2-hood-strut-kit-2006-2015","title":"Ford Galaxy 2 Hood Strut Kit 2006-2015","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Galaxy 2 2006-2015\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Galaxy 2 (2006-2015) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Galaxy 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2006-2015\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-GAL-02-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Galaxy 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Galaxy 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998126760,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_7d53b1bd-edd8-404e-beaa-21d813d3c52c.png?v=1786220008"},{"product_id":"ford-kuga-1-hood-strut-kit-2008-2012","title":"Ford Kuga 1 Hood Strut Kit 2008-2012","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Kuga 1 2008-2012\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Kuga 1 (2008-2012) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Kuga 1\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2008-2012\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-KUG-01-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Kuga 1.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Kuga 1.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998159528,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_7b178fde-e18e-4b8e-a1f0-9d46f0ca10ae.png?v=1786220009"},{"product_id":"ford-kuga-2-hood-strut-kit-2012-2019","title":"Ford Kuga 2 Hood Strut Kit 2012-2019","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Kuga 2 2012-2019\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Kuga 2 (2012-2019) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Kuga 2\u003c\/li\u003e\n\u003cli\u003eGeneration: 02\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2012-2019\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-KUG-02-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Kuga 2.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Kuga 2.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998225064,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_9c362390-9aa4-40fe-90e8-a2e206d74cd6.png?v=1786220010"},{"product_id":"ford-kuga-3-hood-strut-kit-2019","title":"Ford Kuga 3 Hood Strut Kit (Aluminum Hood) 2019+","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Kuga 3 2019+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Kuga 3 (2019+) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Kuga 3\u003c\/li\u003e\n\u003cli\u003eGeneration: 03\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2019+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-KUG-03-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Aluminum hood; Also listed for: Escape 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Kuga 3.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Kuga 3.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998257832,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_9797aa7a-74af-4f86-8ca0-a4a417a7bf09.png?v=1786220010"},{"product_id":"ford-kuga-3-hood-strut-kit-2020","title":"Ford Kuga 3 Hood Strut Kit (Steel Hood) 2019+","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Kuga 3 2019+\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Kuga 3 (2019+) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Kuga 3\u003c\/li\u003e\n\u003cli\u003eGeneration: 03\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2019+\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-KUG-03FE-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: Steel hood; Also listed for: Escape 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Kuga 3.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Kuga 3.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998880424,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_88dccd89-1bad-4bcb-acc6-088abcf5a08a.png?v=1786220011"},{"product_id":"ford-mustang-hood-strut-kit-2015-2022","title":"Ford Mustang Hood Strut Kit 2015-2022","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Mustang 2015-2022\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Mustang (2015-2022) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Mustang\u003c\/li\u003e\n\u003cli\u003eGeneration: 06\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2015-2022\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-MUS-06-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: For hood with vent hole(s)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Mustang.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Mustang.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998913192,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_d9dc7633-644e-4114-9036-8b5989f703ff.png?v=1786220012"},{"product_id":"ford-mustang-6-hood-strut-kit-2017-2022","title":"Ford Mustang 6 Hood Strut Kit 2017-2022","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Mustang 6 2017-2022\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Mustang 6 (2017-2022) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Mustang 6\u003c\/li\u003e\n\u003cli\u003eGeneration: 06R\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2017-2022\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-MUS-06R-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: For hood with vent hole(s)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Mustang 6.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Mustang 6.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998945960,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_3ee18c50-7710-4d77-8e89-4e1be7f0137e.png?v=1786220013"},{"product_id":"ford-mustang-6-hood-strut-kit-2015-2022","title":"Ford Mustang 6 Hood Strut Kit 2015-2022","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Mustang 6 2015-2022\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Mustang 6 (2015-2022) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Mustang 6\u003c\/li\u003e\n\u003cli\u003eGeneration: 06\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2015-2022\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-MUS-06RS-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Mustang 6.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Mustang 6.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854998978728,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_b43fa6a1-7b1a-447d-bff7-189f80fbdc25.png?v=1786220014"},{"product_id":"ford-mondeo-4-hood-strut-kit-2007-2014","title":"Ford Mondeo 4 Hood Strut Kit 2007-2014","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Mondeo 4 2007-2014\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Mondeo 4 (2007-2014) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Mondeo 4\u003c\/li\u003e\n\u003cli\u003eGeneration: 04\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2007-2014\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-MON-04-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Mondeo 4.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Mondeo 4.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854999011496,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_f7d672bc-536a-4b00-8ced-4809d9911a56.png?v=1786220014"},{"product_id":"ford-tourneo-connect-hood-strut-kit-2002-2008","title":"Ford Tourneo Connect Hood Strut Kit 2002-2008","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Tourneo Connect 2002-2008\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Tourneo Connect (2002-2008) and includes one gas strut along with the vehicle-specific mounting components and installation guidance needed for this application. The gas strut hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas strut, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Tourneo Connect\u003c\/li\u003e\n\u003cli\u003eGeneration: 01\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2002-2008\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 1\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-TOU-01-1\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas strut, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Tourneo Connect.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas strut, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Tourneo Connect.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854999044264,"sku":null,"price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_19f93a54-140d-4de9-a135-9dcf69aed66b.png?v=1786220015"},{"product_id":"ford-ranger-hood-strut-kit-2018-2022","title":"Ford Ranger Hood Strut Kit 2018-2022","description":"\u003ch2\u003eComplete Hood Strut Kit for Ford Ranger 2018-2022\u003c\/h2\u003e\u003cp\u003eThis complete hood strut kit is made for the Ford Ranger (2018-2022) and includes two gas struts along with the vehicle-specific mounting components and installation guidance needed for this application. The gas struts hold the hood open and replace the original manual prop rod, so the hood stays up on its own. Rather than a bare replacement strut, this is a ready-to-install kit matched to your vehicle, designed to fit using the factory mounting points with no drilling and no body modification.\u003c\/p\u003e\u003ch2\u003eWhy This Is More Than Just a Gas Strut\u003c\/h2\u003e\u003cp\u003eUnlike a bare replacement gas strut, this product is supplied as a complete vehicle-specific installation kit with the mounting components and installation guidance required for the listed vehicle application. It brings together the gas struts, vehicle-specific mounting brackets and hardware, and a vehicle-specific installation guide in a single kit, so you have what you need for a do-it-yourself installation.\u003c\/p\u003e\u003ch2\u003eVehicle Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Ranger\u003c\/li\u003e\n\u003cli\u003eGeneration: 04\u003c\/li\u003e\n\u003cli\u003eProduction Years: 2018-2022\u003c\/li\u003e\n\u003cli\u003eNumber of Gas Struts: 2\u003c\/li\u003e\n\u003cli\u003eVendor Article: EU-FO-RAN-04-2\u003c\/li\u003e\n\u003cli\u003eSupplier Fitment Notes: None specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe kit includes the listed gas struts, vehicle-specific mounting components and installation guidance. Exact brackets and fasteners vary by vehicle application; see the included vehicle-specific installation guide for the precise contents for your Ford Ranger.\u003c\/p\u003e\u003ch2\u003eHow the Kit Installs\u003c\/h2\u003e\u003cp\u003eInstallation involves fitting the vehicle-specific mounting brackets to the factory mounting points, attaching the gas struts, and securing the hardware as shown in the included guide. Because the kit uses existing factory points, no drilling or body modification is required. Always follow the included vehicle-specific installation guide for the exact mounting locations and sequence for your Ford Ranger.\u003c\/p\u003e\u003ch2\u003eDIY Installation\u003c\/h2\u003e\u003cp\u003eThis kit is designed for do-it-yourself installation in up to 30 minutes using the factory mounting points, with no drilling and no body modification. Basic hand tools are typically all that is needed. Follow the included vehicle-specific manual for the correct steps for your vehicle.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the model, production year, generation and body configuration match your vehicle, and review the supplier fitment notes listed above. If your vehicle has a specific hood type (for example aluminum or steel) or configuration, make sure it matches this listed application before ordering.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":55854999077032,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7996\/9192\/files\/22_46_32_2f1ddd89-4a66-4779-8409-072ac5cfc04c.png?v=1786220016"}],"url":"https:\/\/decoinfabric.com\/en-be\/collections\/hood-strut-kits-for-ford\/ford-mustang.oembed","provider":"decoinfabric","version":"1.0","type":"link"}